All Products
D20 Smart Sliding Gate Motor Kit
Centsys D20 Smart
When it’s time to beef up security, you need real muscle, the kind that only the number one in access automation can deliver. Introducing the brand new D20 SMART industrial sliding gate motor. If your high-volume site calls for the kind of security that never backs down even when it’s pushed beyond the limits of other gate motors, make the intelligent choice and get the D20 SMART.
Available in
- 240V at Gate
- Low Voltage at Gate 24VAC Weatherproof Plug Pack 30m
- Solar with 2 x 33ah Batteries and 60w Solar Panel
Main Features:
- Strong enough to move a 2t gate
- Easy “drop-in” replacement for existing A10 sites
- Installer-friendly design with easy access to mounting hardware, optimised cable routing and a dedicated accessory tray
- Smooth and strong
- SMART hardware and SMART connectivity provide the best experience for installers
- Intelligent theft and break-in protection with an integral vibration sensor and patented theft-deterrent cage
- More space and dedicated accessory tray for complementary solutions such as GSM devices
- World-class reliability with a sealed gearbox and improved, more secure manual release mechanism
- Die-cast aluminium gearbox coupled with a high-torque DC motor built for pure power and performance
- Uncompromising security, uninterrupted convenience with 24V battery backup
- Instant access to advanced, in-app diagnostics and logs, monitoring system health in real time
- Accurate and safe position control incorporating reliable Hall Effect technology
- Improved wire routing
- SMART universal controller – compatible with all CENTSYS SMART sliding gate operator
-
D20 SMARTMART
Input voltage 90V – 240V AC +/-10% @ 50Hz Current consumption (Mains) 250mA Battery charger current output 1.8A @ 27.4V +/-1% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x 7.2Ah) Current consumption (motor at rated load) 9A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 52kgf Motor push force – rated 39kgf Gate mass – maximum 2000kg Gate length – maximum 25m Gate speed (varies with load) Up to 18m/min Manual Override Lockable lever with key release Drive Pinion 13T Module Performance during battery backup (no mains power) with 2x 7.2Ah batteries Power Saving (15m/min 20kgf) | Normal (18m/min 20kgf) Half day 101 | 55 Full day 80 | 45 Collision Sensing Electronic Operating temperature range -15°C to +50°C Onboard receiver type CENTSYS rolling code (Keelog encryption) multichannel Receiver code storage capacity 1500 Remotes Receiver frequency 433.92MHz Degree of protection IP54 Mass of unit packed (with standard kit, but excl. rack and battery) 13Kg Packaging dimensions (with standard kit, but excl. rack and battery) 350mm wide x 282mm deep x 470mm high SPECIFICATIONS:
1. Can operate off a solar supply, consult your local dealer for assistance
2. Based on 25°C ambient temperature and unit not in direct sunlight
3. Based on a motor push force of less than 50% of rated (Starting and Running forces)
4. Gate opening and closing speeds can be configured to run slower depending on the
requirements of individual installations
5. Can increase battery capacity for longer standby times
6. Based on 4m gate, excluding all accessories
7. Multiple buttons per remote can be used
For a product Brochure please click HERE
For a product Installation Manual please click HERE:
For a product Data Sheet, please click HERE